This describes a single item in the "Transport:" line of one stream as negotiated by the SETUP RTSP command. More...
#include <rtsp.h>
Data Fields | |
| int | interleaved_min |
| interleave ids, if TCP transport; each TCP/RTSP data packet starts with a '$', stream length and stream ID. | |
| int | interleaved_max |
| int | port_min |
| UDP multicast port range; the ports to which we should connect to receive multicast UDP data. | |
| int | port_max |
| int | client_port_min |
| UDP client ports; these should be the local ports of the UDP RTP (and RTCP) sockets over which we receive RTP/RTCP data. | |
| int | client_port_max |
| int | server_port_min |
| UDP unicast server port range; the ports to which we should connect to receive unicast UDP RTP/RTCP data. | |
| int | server_port_max |
| int | ttl |
| time-to-live value (required for multicast); the amount of HOPs that packets will be allowed to make before being discarded. | |
| struct sockaddr_storage | destination |
| destination IP address | |
| char | source [INET6_ADDRSTRLEN+1] |
| source IP address | |
| enum RTSPTransport | transport |
| data/packet transport protocol; e.g. | |
| enum RTSPLowerTransport | lower_transport |
| network layer transport protocol; e.g. | |
This describes a single item in the "Transport:" line of one stream as negotiated by the SETUP RTSP command.
Multiple transports are comma- separated ("Transport: x-read-rdt/tcp;interleaved=0-1,rtp/avp/udp; client_port=1000-1001;server_port=1800-1801") and described in separate RTSPTransportFields.
Definition at line 82 of file rtsp.h.
Definition at line 95 of file rtsp.h.
Referenced by rtsp_cmd_setup(), and rtsp_parse_transport().
UDP client ports; these should be the local ports of the UDP RTP (and RTCP) sockets over which we receive RTP/RTCP data.
Definition at line 95 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), rtsp_cmd_setup(), and rtsp_parse_transport().
| struct sockaddr_storage RTSPTransportField::destination |
destination IP address
Definition at line 105 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
Definition at line 87 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
interleave ids, if TCP transport; each TCP/RTSP data packet starts with a '$', stream length and stream ID.
If the stream ID is within the range of this interleaved_min-max, then the packet belongs to this stream.
Definition at line 87 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
network layer transport protocol; e.g.
TCP or UDP uni-/multicast
Definition at line 112 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), find_transport(), rtsp_cmd_setup(), and rtsp_parse_transport().
Definition at line 91 of file rtsp.h.
Referenced by rtsp_parse_transport().
UDP multicast port range; the ports to which we should connect to receive multicast UDP data.
Definition at line 91 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
Definition at line 99 of file rtsp.h.
Referenced by rtsp_parse_transport().
UDP unicast server port range; the ports to which we should connect to receive unicast UDP RTP/RTCP data.
Definition at line 99 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
| char RTSPTransportField::source[INET6_ADDRSTRLEN+1] |
source IP address
Definition at line 106 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
data/packet transport protocol; e.g.
RTP or RDT
Definition at line 109 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().
time-to-live value (required for multicast); the amount of HOPs that packets will be allowed to make before being discarded.
Definition at line 103 of file rtsp.h.
Referenced by ff_rtsp_make_setup_request(), and rtsp_parse_transport().