#! /usr/bin/expect --
##
## $Id: elogin.in,v 1.28 2004/02/02 17:38:36 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed
## without fee for non-commerical purposes provided that this license
## remains intact and unmodified with any RANCID distribution.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is".  The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
## Except where noted otherwise, rancid was written by and is maintained by
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
# elogin - ADC EZT3 login
#
# Most options are intuitive for logging into an ADC EZT3 mux.
#

# Usage line
set usage "Usage: $argv0 \[-noenable\] \[-c command\] \
\[-Evar=x\] \[-f cloginrc-file\] \[-p user-password\] \
\[-s script-file\] \[-t timeout\] \[-u username\] \
\[-v vty-password\] \[-w enable-username\] \[-x command-file\] \
\[-y ssh_cypher_type\] router \[router...\]\n"

# env(CLOGIN) may contain:
#	x == do not set xterm banner or name

# Password file
set password_file $env(HOME)/.cloginrc
# Default is to login to the router
set do_command 0
set do_script 0
# The default is to automatically enable
set avenable 1
# The default is that you login non-enabled (tacacs can have you login already
# enabled)
set avautoenable 0
# The default is to look in the password file to find the passwords.  This
# tracks if we receive them on the command line.
set do_passwd 1

# Find the user in the ENV, or use the unix userid.
if {[ info exists env(CISCO_USER) ] } {
    set default_user $env(CISCO_USER)
} elseif {[ info exists env(USER) ]} {
    set default_user $env(USER)
} elseif {[ info exists env(LOGNAME) ]} {
    set default_user $env(LOGNAME)
} else {
    # This uses "id" which I think is portable.  At least it has existed
    # (without options) on all machines/OSes I've been on recently -
    # unlike whoami or id -nu.
    if [ catch {exec id} reason ] {
	send_error "\nError: could not exec id: $reason\n"
	exit 1
    } 
    regexp {\(([^)]*)} "$reason" junk default_user
}   

# Sometimes routers take awhile to answer (the default is 10 sec)
set timeout 45

# Process the command line
for {set i 0} {$i < $argc} {incr i} {
    set arg [lindex $argv $i]

    switch  -glob -- $arg {
	# Username
	-u* -
	-U* {
	    if {! [  regexp .\[uU\](.+) $arg ignore user]} {
		incr i
		set username [ lindex $argv $i ]
	    }
	# VTY Password
	} -p* -
	-P* {
	    if {! [  regexp .\[pP\](.+) $arg ignore userpasswd]} {
		incr i
		set userpasswd [ lindex $argv $i ]
	    }
	    set do_passwd 0
	# VTY Password
	} -v* -
	-v* {
	    if {! [  regexp .\[vV\](.+) $arg ignore passwd]} {
		incr i
		set passwd [ lindex $argv $i ]
	    }
	    set do_passwd 0
	# Enable Username
	} -w* -
	-W* {
	# ignore -w
	# Environment variable to pass to -s scripts
	} -E*
	{
	    if {[ regexp .\[E\](.+)=(.+) $arg ignore varname varvalue]} {
		set E$varname $varvalue
	    } else {
		send_user "\nError: invalid format for -E in $arg\n"
		exit 1
	    }
	# Enable Password
	} -e*
	{
	# ignore -e
	# Command to run.
	} -c* -
	-C* {
	    if {! [  regexp .\[cC\](.+) $arg ignore command]} {
		incr i
		set command [ lindex $argv $i ]
	    }
	    set do_command 1
	# Expect script to run.
	} -s* -
	-S* {
	    if {! [  regexp .\[sS\](.+) $arg ignore sfile]} {
		incr i
		set sfile [ lindex $argv $i ]
	    }
	    if { ! [ file readable $sfile ] } {
		send_user "\nError: Can't read $sfile\n"
		exit 1
	    }
	    set do_script 1
	# 'ssh -c' cypher type
	} -y* -
	-Y* {
	    if {! [  regexp .\[eE\](.+) $arg ignore cypher]} {
		incr i
		set cypher [ lindex $argv $i ]
	    }
	# alternate cloginrc file
	} -f* -
	-F* {
	    if {! [ regexp .\[fF\](.+) $arg ignore password_file]} {
		incr i
		set password_file [ lindex $argv $i ]
	    }
	# Timeout
	} -t* -
	-T* {
	    if {! [ regexp .\[tT\](.+) $arg ignore timeout]} {
		incr i
	        set timeout [ lindex $argv $i ]
	    }
	# Command file
	} -x* -
	-X {
	    if {! [  regexp .\[xX\](.+) $arg ignore cmd_file]} {
		incr i
		set cmd_file [ lindex $argv $i ]
	    }
	    if [ catch {set cmd_fd [open $cmd_file r]} reason ] {
		send_user "\nError: $reason\n"
		exit 1
	    }
	    set cmd_text [read $cmd_fd]
	    close $cmd_fd
	    set command [join [split $cmd_text \n] \;]
	    set do_command 1
	# Do we enable?
	} -noenable {
	    # ignore -noenable
	# Does tacacs automatically enable us?
	} -autoenable {
	    # ignore -autoenable
	} -* {
	    send_user "\nError: Unknown argument! $arg\n"
	    send_user $usage
	    exit 1
	} default {
	    break
	}
    }
}
# Process routers...no routers listed is an error.
if { $i == $argc } {
    send_user "\nError: $usage"
}

# Only be quiet if we are running a script (it can log its output
# on its own)
if { $do_script } {
    log_user 0
} else {
    log_user 1
}

#
# Done configuration/variable setting.  Now run with it...
#

# Sets Xterm title if interactive...if its an xterm and the user cares
proc label { host } {
    global env
    # if CLOGIN has an 'x' in it, don't set the xterm name/banner
    if [info exists env(CLOGIN)] {
	if {[string first "x" $env(CLOGIN)] != -1} { return }
    }
    # take host from ENV(TERM)
    if [info exists env(TERM)] {
	if [regexp \^(xterm|vs) $env(TERM) ignore ] {
	    send_user "\033]1;[lindex [split $host "."] 0]\a"
	    send_user "\033]2;$host\a"
	}
    }
}

# This is a helper function to make the password file easier to
# maintain.  Using this the password file has the form:
# add password sl*	pete cow
# add password at*	steve
# add password *	hanky-pie
proc add {var args} { global int_$var ; lappend int_$var $args}
proc include {args} {
    global env
    regsub -all "(^{|}$)" $args {} args
    if { [ regexp "^/" $args ignore ] == 0 } {
	set args $env(HOME)/$args
    }
    source_password_file $args
}

proc find {var router} {
    upvar int_$var list
    if { [info exists list] } {
	foreach line $list {
	    if { [string match [lindex $line 0] $router ] } {
		return [lrange $line 1 end]
	    }
	}
    }
    return {}
}

# Loads the password file.  Note that as this file is tcl, and that
# it is sourced, the user better know what to put in there, as it
# could install more than just password info...  I will assume however,
# that a "bad guy" could just as easy put such code in the clogin
# script, so I will leave .cloginrc as just an extention of that script
proc source_password_file { password_file } {
    global env
    if { ! [file exists $password_file] } {
	send_user "\nError: password file ($password_file) does not exist\n"
	exit 1
    }
    file stat $password_file fileinfo
    if { [expr ($fileinfo(mode) & 007)] != 0000 } {
	send_user "\nError: $password_file must not be world readable/writable\n"
	exit 1
    }
    if [ catch {source $password_file} reason ] {
	send_user "\nError: $reason\n"
	exit 1
    }
}

# Log into the router.
proc login { router user userpswd passwd prompt cmethod cyphertype } {
    global spawn_id in_proc do_command do_script
    global u_prompt p_prompt
    set in_proc 1
    set uprompt_seen 0 

    # try each of the connection methods in $cmethod until one is successful
    set progs [llength $cmethod]
    foreach prog [lrange $cmethod 0 end] {
	if [string match "telnet*" $prog] {
	    regexp {telnet(:([^[:space:]]+))*} $prog command suffix port
	    if {"$port" == ""} {
		set retval [ catch {spawn telnet $router} reason ]  
	    } else { 
		set retval [ catch {spawn telnet $router $port} reason ]
	    }
	    if { $retval } {
		send_user "\nError: telnet failed: $reason\n"
		exit 1 
	    }
	} else {
	    puts "\nError: unknown connection method: $prog"
	    return 1
	}
	incr progs -1
	sleep 0.3

    # This helps cleanup each expect clause.
    expect_after {
	timeout {
	    send_user "\nError: TIMEOUT reached\n"
	    catch {close}; wait
	    if { $in_proc} {
		return 1
	    } else {
		continue
	    }
	} eof {
	    send_user "\nError: EOF received\n"
	    catch {close}; wait
	    if { $in_proc} {
		return 1
	    } else {
		continue
	    }
	}
    }

    expect {
	"Connection refused" {
	    close; wait
	    sleep 0.3
		expect eof
		send_user "\nError: Connection Refused\n"; wait; return 1
	} eof { send_user "\nError: Couldn't login\n"; wait; return 1
	} "Unknown host\r\n" {
	    expect eof
	    send_user "\nError: Unknown host\n"; wait; return 1
	} "Host is unreachable" {
	    expect eof
	    send_user "\nError: Host Unreachable!\n"; wait; return 1
	} "No address associated with name" {
	    expect eof
	    send_user "\nError: Unknown host\n"; wait; return 1
	}
	-re "$u_prompt"			{
					  send "$user\r"
					  set uprompt_seen 1
					  exp_continue
					}
	-re "$p_prompt"			{
					  sleep 1
					  if {$uprompt_seen == 1} {
						send "$userpswd\r"
					  } else {
						send "$passwd\r"
					  }
					  exp_continue
					}
	"Password incorrect"	{ send_user "\nError: Check your password for $router\n";
				  catch {close}; wait; return 1
				}
	"$prompt"	{ break; }
	denied		{ send_user "\nError: Check your passwd for $router\n"
			  catch {close}; wait; return 1
			}
	"\r\n"	{ exp_continue; }
     }
    }
    set in_proc 0
    return 0
}

# Run commands given on the command line.
proc run_commands { prompt command } {
    global in_proc
    set in_proc 1

    send "screen 0\r"
    expect $prompt {}

    regsub -all "\[)(]" $prompt {\\&} reprompt

    # Is this a multi-command?
    if [ string match "*\;*" "$command" ] {
	set commands [split $command \;]
	set num_commands [llength $commands]

	for {set i 0} {$i < $num_commands} { incr i} {
	    send "[subst -nocommands [lindex $commands $i]]\r"
	    expect {
		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
		-re "^\[^\n\r *]*$reprompt"	{}
		-re "\[\n\r]"			{ exp_continue }
	    }
	}
    } else {
	send "[subst -nocommands $command]\r"
	expect {
		-re "^\[^\n\r]*$reprompt."	{ exp_continue }
		-re "^\[^\n\r *]*$reprompt"	{}
		-re "\[\n\r]"			{ exp_continue }
	}
    }
    send "exit\r"
    expect {
	"\n" { exp_continue }
	timeout { return 0 }
	eof { return 0 }
    }
    set in_proc 0
}

#
# For each router... (this is main loop)
#
source_password_file $password_file
set in_proc 0
foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    send_user "$router\n"

    # Figure out prompt.
    set prompt "Active) > "
    set autoenable 1
    set enable 0

    # Figure out passwords
    if { $do_passwd } {
      set pswd [find password $router]
      if { [llength $pswd] == 0 } {
	send_user "\nError: no password for $router in $password_file.\n"
	continue
      }
      set passwd [join [lindex $pswd 0] ""]
    }

    # Figure out username
    if {[info exists username]} {
      # command line username
      set ruser $username
    } else {
      set ruser [join [find user $router] ""]
      if { "$ruser" == "" } { set ruser $default_user }
    }

    # Figure out username's password (if different from the vty password)
    if {[info exists userpasswd]} {
      # command line username
      set userpswd $userpasswd
    } else {
      set userpswd [join [find userpassword $router] ""]
      if { "$userpswd" == "" } { set userpswd $passwd }
    }

    # Figure out prompts
    set u_prompt [find userprompt $router]
    if { "$u_prompt" == "" } {
	set u_prompt "(Username|login|  Login):"
    } else {
	set u_prompt [join [lindex $u_prompt 0] ""]
    }
    set p_prompt [find passprompt $router]
    if { "$p_prompt" == "" } {
	set p_prompt "\[Pp]assword:"
    } else {
	set p_prompt [join [lindex $p_prompt 0] ""]
    }

    # Figure out cypher type
    if {[info exists cypher]} {
      # command line cypher type
      set cyphertype $cypher
    } else {
      set cyphertype [find cyphertype $router]
      if { "$cyphertype" == "" } { set cyphertype "3des" }
    }

    # Figure out connection method
    set cmethod [find method $router]
    if { "$cmethod" == "" } { set cmethod {{telnet}} }

    # Login to the router
    if {[login $router $ruser $userpswd $passwd $prompt $cmethod $cyphertype]} {
	continue
    }

    if { $do_command } {
	if {[run_commands $prompt $command]} {
	    continue
	}
    } elseif { $do_script } {
	send "screen 0\r"
	expect $prompt	{}
	source $sfile
	close
    } else {
	label $router
	log_user 1
	interact
    }

    # End of for each router
    wait
    sleep 0.3
}
exit 0
