|
spandsp
0.0.6
|
Go to the source code of this file.
Typedefs | |
| typedef struct v17_rx_state_s | v17_rx_state_t |
Functions | |
| v17_rx_state_t * | v17_rx_init (v17_rx_state_t *s, int bit_rate, put_bit_func_t put_bit, void *user_data) |
| Initialise a V.17 modem receive context. More... | |
| int | v17_rx_restart (v17_rx_state_t *s, int bit_rate, int short_train) |
| Reinitialise an existing V.17 modem receive context. More... | |
| int | v17_rx_release (v17_rx_state_t *s) |
| Release a V.17 modem receive context. More... | |
| int | v17_rx_free (v17_rx_state_t *s) |
| Free a V.17 modem receive context. More... | |
| logging_state_t * | v17_rx_get_logging_state (v17_rx_state_t *s) |
| Get the logging context associated with a V.17 modem receive context. More... | |
| void | v17_rx_set_put_bit (v17_rx_state_t *s, put_bit_func_t put_bit, void *user_data) |
| Change the put_bit function associated with a V.17 modem receive context. More... | |
| void | v17_rx_set_modem_status_handler (v17_rx_state_t *s, modem_status_func_t handler, void *user_data) |
| Change the modem status report function associated with a V.17 modem receive context. More... | |
| SPAN_DECLARE_NONSTD (int) v17_rx(v17_rx_state_t *s | |
| Process a block of received V.17 modem audio samples. More... | |
| int | v17_rx_equalizer_state (v17_rx_state_t *s, complexf_t **coeffs) |
| Get a snapshot of the current equalizer coefficients. More... | |
| float | v17_rx_carrier_frequency (v17_rx_state_t *s) |
| float | v17_rx_symbol_timing_correction (v17_rx_state_t *s) |
| float | v17_rx_signal_power (v17_rx_state_t *s) |
| void | v17_rx_signal_cutoff (v17_rx_state_t *s, float cutoff) |
| void | v17_rx_set_qam_report_handler (v17_rx_state_t *s, qam_report_handler_t handler, void *user_data) |
Variables | |
| const int16_t | amp [] |
| const int16_t int | len |
| typedef struct v17_rx_state_s v17_rx_state_t |
V.17 modem receive side descriptor. This defines the working state for a single instance of a V.17 modem receiver.
| SPAN_DECLARE_NONSTD | ( | int | ) |
Process a block of received V.17 modem audio samples.
Get the next bit of data from a T.38 rate adapting non-ECM buffer context.
Get a bit of received non-ECM image data.
Get the next bit of a transmitted serial bit stream.
Fake processing of a missing block of received V.17 modem audio samples.
Process a block of received V.17 modem audio samples.
| s | The modem context. |
| amp | The audio sample buffer. |
| len | The number of samples in the buffer. |
Fake processing of a missing block of received V.17 modem audio samples. (e.g due to packet loss).
| s | The modem context. |
| len | The number of samples to fake. |
| float v17_rx_carrier_frequency | ( | v17_rx_state_t * | s | ) |
Get the current received carrier frequency.
| s | The modem context. |
References dds_frequencyf().
| int v17_rx_equalizer_state | ( | v17_rx_state_t * | s, |
| complexf_t ** | coeffs | ||
| ) |
Get a snapshot of the current equalizer coefficients.
Get a snapshot of the current equalizer coefficients.
| s | The modem context. |
| coeffs | The vector of complex coefficients. |
References v17_rx_state_s::agc_scaling, v17_rx_state_s::agc_scaling_save, v17_rx_state_s::angles, v17_rx_state_s::baud_half, v17_rx_state_s::baud_phase, v17_rx_state_s::bit_rate, v17_rx_state_s::bits_per_symbol, v17_rx_state_s::carrier_drop_pending, CARRIER_NOMINAL_FREQ, v17_rx_state_s::carrier_phase, v17_rx_state_s::carrier_phase_rate, v17_rx_state_s::carrier_phase_rate_save, v17_rx_state_s::carrier_track_i, v17_rx_state_s::carrier_track_p, v17_rx_state_s::constellation, cvec_circular_dot_prodf(), dds_advance(), dds_advancef(), dds_frequencyf(), dds_lookup_complexf(), v17_rx_state_s::diff, v17_rx_state_s::distances, v17_rx_state_s::eq_buf, v17_rx_state_s::eq_coeff, v17_rx_state_s::eq_coeff_save, v17_rx_state_s::eq_delta, v17_rx_state_s::eq_put_step, v17_rx_state_s::eq_skip, v17_rx_state_s::eq_step, EQUALIZER_FAST_ADAPTION_DELTA, EQUALIZER_MEDIUM_ADAPTION_DELTA, EQUALIZER_SLOW_ADAPTION_DELTA, v17_rx_state_s::full_path_to_past_state_locations, v17_rx_state_s::high_sample, complexf_t::im, complexi_t::im, complexi16_t::im, complexi32_t::im, v17_rx_state_s::last_sample, v17_rx_state_s::logging, v17_rx_state_s::low_samples, v17_rx_state_s::past_state_locations, v17_rx_state_s::power, power_meter_init(), power_meter_update(), v17_rx_state_s::put_bit, v17_rx_state_s::put_bit_user_data, v17_rx_state_s::qam_report, v17_rx_state_s::qam_user_data, complexf_t::re, complexi_t::re, complexi16_t::re, complexi32_t::re, v17_rx_state_s::rrc_filter, v17_rx_state_s::rrc_filter_step, v17_rx_state_s::scramble_reg, v17_rx_state_s::short_train, SIG_STATUS_CARRIER_DOWN, SIG_STATUS_CARRIER_UP, SIG_STATUS_TRAINING_FAILED, SIG_STATUS_TRAINING_IN_PROGRESS, SIG_STATUS_TRAINING_SUCCEEDED, v17_rx_state_s::signal_present, v17_rx_state_s::space_map, SPAN_DECLARE_NONSTD(), span_log(), v17_rx_state_s::start_angles, v17_rx_state_s::symbol_sync_dc_filter, v17_rx_state_s::symbol_sync_high, v17_rx_state_s::symbol_sync_low, v17_rx_state_s::total_baud_timing_correction, v17_rx_state_s::training_count, v17_rx_state_s::training_error, v17_rx_state_s::training_stage, v17_rx_state_s::trellis_ptr, V17_BRIDGE_WORD, v17_rx_restart(), V17_TRAINING_SEG_1_LEN, V17_TRAINING_SEG_2_LEN, V17_TRAINING_SEG_3_LEN, V17_TRAINING_SEG_4_LEN, V17_TRAINING_SEG_4A_LEN, V17_TRAINING_SHORT_SEG_2_LEN, vec_circular_dot_prodf(), and vec_circular_dot_prodi16().
Referenced by v17_rx_signal_cutoff().
| int v17_rx_free | ( | v17_rx_state_t * | s | ) |
Free a V.17 modem receive context.
Free a V.17 modem receive context.
| s | The modem context. |
| logging_state_t* v17_rx_get_logging_state | ( | v17_rx_state_t * | s | ) |
Get the logging context associated with a V.17 modem receive context.
Get the logging context associated with a V.17 modem receive context.
| s | The modem context. |
| v17_rx_state_t* v17_rx_init | ( | v17_rx_state_t * | s, |
| int | bit_rate, | ||
| put_bit_func_t | put_bit, | ||
| void * | user_data | ||
| ) |
Initialise a V.17 modem receive context.
Initialise a V.17 modem receive context.
| s | The modem context. |
| bit_rate | The bit rate of the modem. Valid values are 7200, 9600, 12000 and 14400. |
| put_bit | The callback routine used to put the received data. |
| user_data | An opaque pointer passed to the put_bit routine. |
References CARRIER_NOMINAL_FREQ, v17_rx_restart(), and v17_rx_signal_cutoff().
Referenced by fax_modems_get_logging_state(), and faxtester_set_tep_mode().
| int v17_rx_release | ( | v17_rx_state_t * | s | ) |
Release a V.17 modem receive context.
Release a V.17 modem receive context.
| s | The modem context. |
| int v17_rx_restart | ( | v17_rx_state_t * | s, |
| int | bit_rate, | ||
| int | short_train | ||
| ) |
Reinitialise an existing V.17 modem receive context.
Reinitialise an existing V.17 modem receive context.
| s | The modem context. |
| bit_rate | The bit rate of the modem. Valid values are 7200, 9600, 12000 and 14400. |
| short_train | TRUE if a short training sequence is expected. |
References CARRIER_NOMINAL_FREQ, dds_frequencyf(), power_meter_init(), and span_log().
Referenced by faxtester_tx(), v17_rx_equalizer_state(), and v17_rx_init().
| void v17_rx_set_modem_status_handler | ( | v17_rx_state_t * | s, |
| modem_status_func_t | handler, | ||
| void * | user_data | ||
| ) |
Change the modem status report function associated with a V.17 modem receive context.
Change the modem status report function associated with a V.17 modem receive context.
| s | The modem context. |
| handler | The callback routine used to report modem status changes. |
| user_data | An opaque pointer. |
Referenced by fax_modem_to_str().
| void v17_rx_set_put_bit | ( | v17_rx_state_t * | s, |
| put_bit_func_t | put_bit, | ||
| void * | user_data | ||
| ) |
Change the put_bit function associated with a V.17 modem receive context.
Change the put_bit function associated with a V.17 modem receive context.
| s | The modem context. |
| put_bit | The callback routine used to handle received bits. |
| user_data | An opaque pointer. |
Referenced by faxtester_tx().
| void v17_rx_set_qam_report_handler | ( | v17_rx_state_t * | s, |
| qam_report_handler_t | handler, | ||
| void * | user_data | ||
| ) |
Set a handler routine to process QAM status reports
| s | The modem context. |
| handler | The handler routine. |
| user_data | An opaque pointer passed to the handler routine. |
| void v17_rx_signal_cutoff | ( | v17_rx_state_t * | s, |
| float | cutoff | ||
| ) |
Set the power level at which the carrier detection will cut in
| s | The modem context. |
| cutoff | The signal cutoff power, in dBm0. |
References power_meter_level_dbm0(), v17_rx_state_s::put_bit, v17_rx_state_s::put_bit_user_data, v17_rx_state_s::status_handler, v17_rx_state_s::status_user_data, and v17_rx_equalizer_state().
Referenced by v17_rx_init().
| float v17_rx_signal_power | ( | v17_rx_state_t * | s | ) |
Get a current received signal power.
| s | The modem context. |
References power_meter_current_dbm0().
Referenced by fax_modem_to_str().
| float v17_rx_symbol_timing_correction | ( | v17_rx_state_t * | s | ) |
Get the current symbol timing correction since startup.
| s | The modem context. |