 |
SUMO - Simulation of Urban MObility
|
|
SUMO - Simulation of Urban MObility
|
Go to the source code of this file.
| anonymous enum |
Message and object IDs used by the FOX-version of the gui.
| Enumerator | |
|---|---|
| ID_ABOUT | Show about - dialog. |
| MID_WINDOW | Main window-ID. |
| MID_QUIT | Main window closes. |
| MID_OK | Ok-button pressed. |
| MID_CANCEL | Cancel-button pressed. |
| MID_OPEN_CONFIG | Open configuration - ID. |
| MID_OPEN_NETWORK | Open network - ID. |
| MID_OPEN_SHAPES | Load additional file with poi and polygons. |
| MID_OPEN_ADDITIONALS | Load additional file with additional elements. |
| MID_RELOAD | Reload the previously loaded simulation. |
| MID_RECENTFILE | Loads a file previously loaded. |
| MID_CLOSE | Close simulation - ID. |
| MID_ABOUT | About SUMO - ID. |
| MID_START | Start the simulation. |
| MID_STOP | Stop the simulation. |
| MID_STEP | Perform a single simulation step. |
| MID_NEW_MICROVIEW | Open a new microscopic view. |
| MID_NEW_OSGVIEW | Open a new microscopic 3D view. |
| ID_LOADTHREAD_EVENT | The loading thread. |
| ID_RUNTHREAD_EVENT | The Simulation execution thread. |
| ID_THREAD_EVENT | ID for message passing between threads. |
| MID_EDITCHOSEN | Open editor for selections. |
| MID_EDIT_BREAKPOINTS | Edit simulation breakpoints. |
| MID_NETEDIT | Open in netedit. |
| MID_APPSETTINGS | Application settings - menu entry. |
| MID_GAMING | Gaming mode - menu entry. |
| MID_FULLSCREEN | Fullscreen mode - menu entry. |
| MID_LISTINTERNAL | Locator configuration - menu entry. |
| MID_LISTPARKING | |
| MID_LISTTELEPORTING | |
| MID_SIMDELAY | The Simulation delay control. |
| MID_CLEARMESSAGEWINDOW | Clear simulation output. |
| MID_SHOWNETSTATS | Show network statistics. |
| MID_SHOWVEHSTATS | Show vehicle statistics. |
| MID_SHOWPERSONSTATS | Show person statistics. |
| MID_RECENTERVIEW | Recenter view - button. |
| MID_ALLOWROTATION | Allow rotation - button. |
| MID_LOCATEJUNCTION | Locate junction - button. |
| MID_LOCATEEDGE | Locate edge - button. |
| MID_LOCATEVEHICLE | Locate vehicle - button. |
| MID_LOCATEPERSON | Locate person - button. |
| MID_LOCATETLS | Locate TLS - button. |
| MID_LOCATEADD | Locate addtional structure - button. |
| MID_LOCATEPOI | Locate poi - button. |
| MID_LOCATEPOLY | Locate polygons - button. |
| MID_EDITVIEWPORT | Open viewport editor - button. |
| MID_EDITVIEWSCHEME | Open view editor - button. |
| MID_SHOWTOOLTIPS | Show tool tips - button. |
| MID_MAKESNAPSHOT | Make snapshot - button. |
| MID_ZOOM_STYLE | toogle zooming style |
| MID_TIME_TOOGLE | toogle time display mode |
| MID_DELAY_TOOGLE | toogle delay between alternative value |
| MID_GLCANVAS | GLCanvas - ID. |
| MID_CHORE | chore |
| MID_COLOURSCHEMECHANGE | Change coloring scheme - combo. |
| MID_CENTER | Center view to object - popup entry. |
| MID_COPY_NAME | Copy object name - popup entry. |
| MID_COPY_TYPED_NAME | Copy typed object name - popup entry. |
| MID_COPY_EDGE_NAME | Copy edge name (for lanes only) |
| MID_COPY_CURSOR_POSITION | Copy cursor position - popup entry. |
| MID_COPY_CURSOR_GEOPOSITION | Copy cursor geo-coordinate position - popup entry. |
| MID_OPEN_ADDITIONAL_DIALOG | open additional dialog (used in netedit) |
| MID_SHOWPARS | Show object parameter - popup entry. |
| MID_SHOWTYPEPARS | Show object type parameter - popup entry. |
| MID_SWITCH_OFF | Show TLS phases - popup entry. |
| MID_SWITCH | |
| MID_SHOWPHASES | |
| MID_TRACKPHASES | Begin to track phases - menu entry. |
| MID_ADDSELECT | Add to selected items - menu entry. |
| MID_REMOVESELECT | Remove from selected items - Menu Etry. |
| MID_MANIP | Open the object's manipulator. |
| MID_DRAWROUTE | Draw a vehicle's route. |
| MID_SHOW_CURRENTROUTE | Show vehicle's current route. |
| MID_HIDE_CURRENTROUTE | Hide vehicle's current route. |
| MID_SHOW_BEST_LANES | Show vehicle's best lanes. |
| MID_HIDE_BEST_LANES | Hide vehicle's best lanes. |
| MID_SHOW_ALLROUTES | Show all vehicle's routes. |
| MID_HIDE_ALLROUTES | Hide all vehicle's routes. |
| MID_START_TRACK | Start to track a vehicle. |
| MID_STOP_TRACK | Stop to track a vehicle. |
| MID_SHOW_FOES | select foes of a vehicle |
| MID_SHOW_LFLINKITEMS | |
| MID_HIDE_LFLINKITEMS | |
| MID_SHOW_WALKINGAREA_PATH | Show persons's path on walkingarea. |
| MID_HIDE_WALKINGAREA_PATH | Hide persons's path on walkingarea. |
| MID_TABLE | The Table. |
| MID_SIMSTEP | A Simulation step was performed. |
| MID_OPENTRACKER | A Tracker shall be opened. |
| MID_SETTINGS_OK | Ok-button was pushed. |
| MID_SETTINGS_CANCEL | Cancel-button was pushed. |
| MID_QUITONSIMEND | Close simulation at end - Option. |
| MID_AUTOSTART | Start simulation when loaded - Option. |
| MID_DEMO | Demo mode - Option. |
| MID_ALLOWTEXTURES | Allow textures - Option. |
| MID_LOCATELINKS | Locate links in messages - Option. |
| MID_CHOOSER_CENTER | Center object. |
| MID_CHOOSER_TEXT | Text entry. |
| MID_CHOOSER_LIST | Object list. |
| MID_CHOOSER_FILTER | Filter selected. |
| MID_CHOOSEN_OPERATION | set type of selection |
| MID_CHOOSEN_ELEMENTS | set subset of elements |
| MID_CHOOSEN_LOAD | Load set. |
| MID_CHOOSEN_SAVE | Save set. |
| MID_CHOOSEN_CLEAR | Clear set. |
| MID_CHOOSEN_RESET | Reset set. |
| MID_CHOOSEN_DESELECT | Deselect selected items. |
| MID_CHOOSEN_INVERT | Deselect selected items. |
| MID_GNE_DELETEFRAME_CHILDS | NETEDIT. tree list with the childs |
| MID_GNE_DELETEFRAME_CENTER | In GNEDeleteFrame, center element. |
| MID_GNE_DELETEFRAME_INSPECT | In GNEDeleteFrame, inspect element. |
| MID_GNE_DELETEFRAME_DELETE | In GNEDeleteFrame, delete element. |
| MID_GNE_DELETEFRAME_ONLYGEOMETRYPOINTS | delete only geometry points |
| MID_GNE_DELETEFRAME_AUTODELETEADDITIONALS | automatically delete additional childs |
| MID_SIMPLE_VIEW_COLORCHANGE | Informs the dialog about a value's change. |
| MID_SIMPLE_VIEW_NAMECHANGE | Informs the dialog about switching to another scheme. |
| MID_SIMPLE_VIEW_SAVE | For the save-to-db - button. |
| MID_SIMPLE_VIEW_DELETE | For the delete - button. |
| MID_SIMPLE_VIEW_EXPORT | For the export-to-file - button. |
| MID_SIMPLE_VIEW_IMPORT | For the import-from-file - button. |
| MID_SIMPLE_VIEW_LOAD_DECALS | For the load-decals - button. |
| MID_SIMPLE_VIEW_SAVE_DECALS | For the save-decals - button. |
| MID_HELP | help button |
| MID_CLOSE_LANE | |
| MID_CLOSE_EDGE | |
| MID_ADD_REROUTER | |
| MID_GNE_HOTKEY_ESC | hot key <ESC> abort current edit operation |
| MID_GNE_HOTKEY_FOCUSFRAME | hot key <F12> focus upper element of current frame |
| MID_GNE_HOTKEY_DEL | hot key <DEL> delete selections or elements |
| MID_GNE_HOTKEY_ENTER | hot key <ENTER> accept current operation |
| MID_GNE_TOOLBARFILE_NEWNETWORK | create new empty newtork |
| MID_GNE_TOOLBARFILE_OPENFOREIGN | open foreign network |
| MID_GNE_TOOLBARFILE_SAVENETWORK | save newtork |
| MID_GNE_TOOLBARFILE_SAVENETWORK_AS | save newtwork as |
| MID_GNE_TOOLBARFILE_SAVEPLAINXML | save network as plain XML |
| MID_GNE_TOOLBARFILE_SAVEJOINED | save joined junctions |
| MID_GNE_TOOLBARFILE_SAVESHAPES | Save shapes. |
| MID_GNE_TOOLBARFILE_SAVESHAPES_AS | save shapes as |
| MID_GNE_TOOLBARFILE_SAVEADDITIONALS | Save additionals. |
| MID_GNE_TOOLBARFILE_SAVEADDITIONALS_AS | save additionals as |
| MID_GNE_PROCESSING_COMPUTEJUNCTIONS | compute junctions |
| MID_GNE_PROCESSING_COMPUTEJUNCTIONS_VOLATILE | compute junctions with volatile options |
| MID_GNE_PROCESSING_CLEANJUNCTIONS | clean junctions without edges |
| MID_GNE_PROCESSING_JOINJUNCTIONS | join selected junctions |
| MID_GNE_PROCESSING_CLEANINVALIDCROSSINGS | clean invalid crossings |
| MID_GNE_PROCESSING_OPTIONS | open options menu |
| MID_GNE_SETMODE_CREATE_EDGE | mode for adding edges |
| MID_GNE_SETMODE_MOVE | mode for moving things |
| MID_GNE_SETMODE_DELETE | mode for deleting things |
| MID_GNE_SETMODE_INSPECT | mode for inspecting object attributes |
| MID_GNE_SETMODE_SELECT | mode for selecting objects |
| MID_GNE_SETMODE_CONNECT | mode for connecting lanes |
| MID_GNE_SETMODE_TLS | mode for editing tls |
| MID_GNE_SETMODE_ADDITIONAL | mode for editing additional |
| MID_GNE_SETMODE_CROSSING | mode for editing crossing |
| MID_GNE_SETMODE_POLYGON | mode for creating polygons |
| MID_GNE_VIEWPARENT_FRAMEAREAWIDTH | Size of frame area updated. |
| MID_GNE_VIEWNET_SHOW_CONNECTIONS | show connections |
| MID_GNE_VIEWNET_SELECT_EDGES | select edges |
| MID_GNE_VIEWNET_SHOW_BUBBLES | show junctions as bubbles |
| MID_GNE_VIEWNET_MOVE_ELEVATION | move elevation instead of x,y |
| MID_GNE_VIEWNET_SHOW_GRID | show grid |
| MID_GNEFRAME_GEOATTRIBUTE | set GEO Attribute |
| MID_GNEFRAME_USEGEO | enable or disable use GEO |
| MID_GNE_SET_ATTRIBUTE | attribute edited |
| MID_GNE_SET_BLOCKING_SHAPE | attribute block shape |
| MID_GNE_SET_CLOSING_SHAPE | attribute close shape |
| MID_GNE_SELECTORFRAME_SELECTTAG | select tag in selector frame |
| MID_GNE_SELECTORFRAME_SELECTATTRIBUTE | select attribute in selector frame |
| MID_GNE_SELECTORFRAME_PROCESSSTRING | process string |
| MID_GNE_SELECTORFRAME_SELECTSCALE | changes the visual scaling of selected items |
| MID_GNE_CONNECTORFRAME_SELECTDEADENDS | select dead end lanes |
| MID_GNE_CONNECTORFRAME_SELECTDEADSTARTS | select lanes that have no connection leading to it |
| MID_GNE_CONNECTORFRAME_SELECTCONFLICTS | select lanes that are connected from concurrent lanes |
| MID_GNE_CONNECTORFRAME_SELECTPASS | select lanes with connections that have the pass attribute set to 'true' |
| MID_GNE_INSPECTORFRAME_CENTER | In GNEINSPECTORFRAME, center element. |
| MID_GNE_INSPECTORFRAME_INSPECT | In GNEINSPECTORFRAME, inspect element. |
| MID_GNE_INSPECTORFRAME_DELETE | In GNEINSPECTORFRAME, delete element. |
| MID_GNE_INSPECTORFRAME_SETTEMPLATE | set object as template |
| MID_GNE_INSPECTORFRAME_COPYTEMPLATE | copy template |
| MID_GNE_INSPECTORFRAME_GOBACK | go back to the previous element |
| MID_GNE_INSPECTORFRAME_ATTRIBUTEEDITOR | open edit attribute dialog |
| MID_GNE_TLSFRAME_SELECT_JUNCTION | selected junction von TLS |
| MID_GNE_TLSFRAME_UPDATE_STATUS | update TLS status |
| MID_GNE_TLSFRAME_GUESSPROGRAM | replace program with a newly guessed program |
| MID_GNE_TLSFRAME_OFFSET | definition related controls |
| MID_GNE_TLSFRAME_SWITCH | switch between programs |
| MID_GNE_TLSFRAME_CREATE | Create TLS. |
| MID_GNE_TLSFRAME_DELETE | delete TLS |
| MID_GNE_TLSFRAME_RENAME | rename TLS |
| MID_GNE_TLSFRAME_SUBRENAME | sub-rename TLS |
| MID_GNE_TLSFRAME_ADDOFF | add off to TLS |
| MID_GNE_TLSFRAME_PHASE_TABLE | select phase thable |
| MID_GNE_TLSFRAME_PHASE_CREATE | create phase thable |
| MID_GNE_TLSFRAME_PHASE_DELETE | delete phase thable |
| MID_GNE_TLSFRAME_CLEANUP | cleanup unused states |
| MID_GNE_CROSSINGFRAME_CREATECROSSING | Create crossing. |
| MID_GNE_CROSSINGFRAME_USEONLYSELECTEDEDGES | use selected edges only |
| MID_GNE_ADDITIONALFRAME_SELECTADDITIONALTYPE | select type of additional |
| MID_GNE_ADDITIONALFRAME_REFERENCEPOINT | change reference point |
| MID_GNE_ADDITIONALFRAME_CHANGEPARAMETER_TEXT | change parameter of type text |
| MID_GNE_ADDITIONALFRAME_CHANGEPARAMETER_BOOL | change parameter of tpye bool |
| MID_GNE_ADDITIONALFRAME_BLOCKMOVEMENT | attribute block movement |
| MID_GNE_ADDITIONALFRAME_CHANGEPARENT | attribute Parent |
| MID_GNE_ADDITIONALFRAME_ADDROW | add row |
| MID_GNE_ADDITIONALFRAME_REMOVEROW | remove row |
| MID_GNE_ADDITIONALFRAME_SELECTADDITIONALPARENT | select additional parent |
| MID_GNE_ADDITIONALFRAME_SEARCHEDGE | search edge |
| MID_GNE_ADDITIONALFRAME_SHOWONLYSELECTEDEDGES | show only selected edge in a list |
| MID_GNE_ADDITIONALFRAME_SELECTEDGE | select edge |
| MID_GNE_ADDITIONALFRAME_CLEAREDGESELECTION | clear selection of edges |
| MID_GNE_ADDITIONALFRAME_INVERTEDGESELECTION | invert selection of edges |
| MID_GNE_ADDITIONALFRAME_SEARCHLANE | search lane |
| MID_GNE_ADDITIONALFRAME_USESELECTEDLANES | use selected lanes |
| MID_GNE_ADDITIONALFRAME_SELECTLANE | select lane |
| MID_GNE_ADDITIONALFRAME_CLEARLANESELECTION | clear selection of lanes |
| MID_GNE_ADDITIONALFRAME_INVERTLANESELECTION | invert selection of lanes |
| MID_GNE_POLYGONFRAME_STARTDRAWING | start drawing polygon |
| MID_GNE_POLYGONFRAME_STOPDRAWING | stop drawing polygon |
| MID_GNE_POLYGONFRAME_ABORTDRAWING | abort drawing polygon |
| MID_GNE_POLYGONFRAME_CLOSE | enable or disable closing polygon after drawing |
| MID_GNE_EDGE_SET_ENDPOINT | set non-default geometry endpoint |
| MID_GNE_EDGE_RESET_ENDPOINT | restore geometry endpoint to node position |
| MID_GNE_EDGE_STRAIGHTEN | remove inner geometry |
| MID_GNE_EDGE_SMOOTH | smooth geometry |
| MID_GNE_EDGE_STRAIGHTEN_ELEVATION | interpolate z values linear between junctions |
| MID_GNE_EDGE_SMOOTH_ELEVATION | smooth elevation with regard to adjoining edges |
| MID_GNE_EDGE_SPLIT | split an edge |
| MID_GNE_EDGE_SPLIT_BIDI | split an edge |
| MID_GNE_EDGE_REVERSE | reverse an edge |
| MID_GNE_EDGE_ADD_REVERSE | add reverse edge |
| MID_GNE_JUNCTION_CLEAR_CONNECTIONS | clear junction's connections |
| MID_GNE_JUNCTION_RESET_CONNECTIONS | reset junction's connections |
| MID_GNE_JUNCTION_REPLACE | turn junction into geometry node |
| MID_GNE_JUNCTION_EDIT_SHAPE | edit junction shape |
| MID_GNE_CONNECTION_EDIT_SHAPE | edit junction shape |
| MID_GNE_CROSSING_EDIT_SHAPE | edit junction shape |
| MID_GNE_POLYGON_SIMPLIFY_SHAPE | simplify polygon geometry |
| MID_GNE_POLYGON_CLOSE | close opened polygon |
| MID_GNE_POLYGON_OPEN | open closed polygon |
| MID_GNE_POLYGON_SET_FIRST_POINT | Set a vertex of polygon as first verte. |
| MID_GNE_POLYGON_DELETE_GEOMETRY_POINT | delete geometry point |
| MID_GNE_POI_TRANSFORM | Transform POI to POILane, and viceversa. |
| MID_GNE_LANE_DUPLICATE | duplicate a lane |
| MID_GNE_LANE_TRANSFORM_SIDEWALK | transform lane to sidewalk |
| MID_GNE_LANE_TRANSFORM_BIKE | transform lane to bikelane |
| MID_GNE_LANE_TRANSFORM_BUS | transform lane to busLane |
| MID_GNE_LANE_ADD_SIDEWALK | add sidewalk |
| MID_GNE_LANE_ADD_BIKE | add bikelane |
| MID_GNE_LANE_ADD_BUS | add busLane |
| MID_GNE_LANE_REMOVE_SIDEWALK | remove sidewalk |
| MID_GNE_LANE_REMOVE_BIKE | remove bikelane |
| MID_GNE_LANE_REMOVE_BUS | remove busLane |
| MID_GNE_ADDITIONALDIALOG_BUTTONACCEPT | accept button |
| MID_GNE_ADDITIONALDIALOG_BUTTONCANCEL | cancel button |
| MID_GNE_ADDITIONALDIALOG_BUTTONRESET | reset button |
| MID_GNE_VARIABLESPEEDSIGN_ADDROW | |
| MID_GNE_VARIABLESPEEDSIGN_TABLE_STEPS | remove row |
| MID_GNE_REROUTEDIALOG_TABLE_INTERVAL | select table interval |
| MID_GNE_REROUTEDIALOG_TABLE_CLOSINGLANEREROUTE | change table clisng lane reroute reroute |
| MID_GNE_REROUTEDIALOG_TABLE_CLOSINGREROUTE | change table route closing reroute |
| MID_GNE_REROUTEDIALOG_TABLE_DESTPROBREROUTE | change table destiny probability reroute |
| MID_GNE_REROUTEDIALOG_TABLE_ROUTEPROBREROUTE | change table route probability reroute |
| MID_GNE_REROUTEDIALOG_ADD_INTERVAL | add interval |
| MID_GNE_REROUTEDIALOG_ADD_CLOSINGLANEREROUTE | add closing lane reroute |
| MID_GNE_REROUTEDIALOG_ADD_CLOSINGREROUTE | add closing reroute |
| MID_GNE_REROUTEDIALOG_ADD_DESTPROBREROUTE | add destiny probability route |
| MID_GNE_REROUTEDIALOG_ADD_ROUTEPROBREROUTE | add route probability route |
| MID_GNE_REROUTEDIALOG_EDIT_INTERVAL | edit interval |
| MID_GNE_CALIBRATORDIALOG_TABLE_ROUTE | change table route |
| MID_GNE_CALIBRATORDIALOG_ADD_ROUTE | add new route |
| MID_GNE_CALIBRATORDIALOG_TABLE_FLOW | change table flow |
| MID_GNE_CALIBRATORDIALOG_ADD_FLOW | |
| MID_GNE_CALIBRATORDIALOG_TABLE_VEHICLETYPE | change table route |
| MID_GNE_CALIBRATORDIALOG_ADD_VEHICLETYPE | add vehicle type |
| MID_GNE_CALIBRATORDIALOG_SET_VARIABLE | set new variable |
| MID_GNE_CALIBRATORDIALOG_SET_FLOWTYPE | set flow type |
| MID_GNE_ALLOWDISALLOW_CHANGE | select/unselect single vehicle |
| MID_GNE_ALLOWDISALLOW_SELECTALL | select all vehicles |
| MID_GNE_ALLOWDISALLOW_UNSELECTALL | unselect all vehicles |
| MID_GNE_ALLOWDISALLOW_SELECTONLYNONROAD | select only non road vehicles |
| MID_GNE_FIXSTOPPINGPLACES_CHANGE | FixStoppingPlaces dialog. |
| MID_LAST | last element of enum (not used) |
Definition at line 44 of file GUIAppEnum.h.
1.8.13